Recommended NZ | Guide to Money | Gimme: Competitions - Giveaways

Spark announces product recall

Contributor:
Fuseworks Media
Fuseworks Media

Spark has announced today an immediate product recall of a power back-up that has been issued to approximately 14,000 wireless landline phone customers during the last 4 months.

Spark has identified that some of the power back-up devices have incorrectly placed wiring due to a manufacturing error. This creates the risk of overheating which may lead to a potential fire risk.

While the wireless landline works without it, the power back-up was issued to ensure continuity of service in the event of a power outage.

"We are not aware of any fire incidents, or of actual harm being caused to any customers by this manufacturing issue. However, the safety of our customers is paramount, and we are therefore actioning an immediate product recall," said Product Director, Tessa Tierney.

"Spark is therefore asking all customers who have received and installed a wireless landline kit between 22 March 2019 - 2 August 2019 to immediately disconnect the black-coloured power back-up from their white-coloured wireless landline connection box and reconnect the connection box directly to the power socket."

"We will be contacting individual customers as soon as possible to advise them on next steps, including offering them an alternative means of communication should this be required in the event of a power outage."

The recall followed a recent customer report that their power back-up had overheated to the point of smoke emitting from the device. An investigation determined this was likely to be caused by incorrect placement of a wire during the manufacturing process. Other different but concerning wiring inconsistencies were found in a handful of power back-up devices from a sample that were randomly selected and tested.

"Our technical experts advise us that once the power back-up is disconnected from the mains there is a low risk of overheating or fire. Therefore, we urge customers to disconnect the power back-up immediately and reconnect their wireless landline connection box to the power socket."

Customers can either bring the power back-up to their nearest Spark store or contact Spark directly on 0800 159 159 to arrange for collection. In the meantime, customers should store the device in a cool, dry, ventilated place like on a table or garage floor, away from direct sunlight or water.

Those customers who have received the wireless landline kit but have not yet installed it are also being asked to return the kit.

Spark will be proactively contacting all customers over the coming days to walk them through the disconnection process and assist them if they have any concerns about their ability to remain connected during a power cut. As many of the wireless landline customers are older and some do not have internet access, Spark encourages family and friends to assist in making these customers aware of what to do.

The power back-up was chosen by Spark earlier this year after a rigorous testing process. There is no evidence of any design fault or problems with the lithium ion battery that is at the core of the device. Customers can find more information at www.spark.co.nz/productrecall

All articles and comments on Voxy.co.nz have been submitted by our community of users. Please notify us if you believe an item on this site breaches our community guidelines.